ABL SURSUM EVSE 563 - User Manual

CHARGE
YOUR FUTURE!
With ABL
Charging Stations
VERSION: 563-2015-07-1608-14
eMH1eMH1
Basic with cable
EVSE 563 model
Instruction Manual
DE

Summary

Safety and Operating Notices

Safety Notices in this Manual

Important information and symbols for safe installation and use.

Safety notices on the device

General safety information

General safety principles for device operation and maintenance.

Operating instructions; Maintenance

Installation and power supply connection

Prerequisites for the mounting site and installation

Requirements for selecting a suitable mounting location.

Preparation and mechanical installation

Steps for the mechanical mounting of the charging station.

Drilling the mounting holes using the drilling template

Preparing the charging station

Mechanical installation of the charging station

Detailed steps for the mechanical installation of the station.

Electrical installation of your charging station

Procedures for the electrical connection of the charging station.

Taking into operation and charging procedure

Safety information for taking the charging station into operation

Safety notices before operating the charging station.

Normal operation

Charging procedure

Step-by-step guide for charging an electric vehicle.

Resolving errors

Operating states

Error messages during operation with the vehicle

Interpretation of LED error codes and their causes.

Disruptions to the operation of the charging station and solutions

ABL SURSUM EVSE 563 Specifications

General

Brand	ABL
Model	SURSUM EVSE 563
Category	Battery Charger
Connector Type	Type 2
Number of Charging Points	1
Ingress Protection Rating	IP54
Standards Compliance	IEC 61851-1, IEC 62196-2
Rated Voltage	400 V AC
Input Voltage	400 V AC
Number of Phases	3
Frequency	50 Hz
Communication Interface	Ethernet
Mounting	Wall