EasyManua.ls Logo

ABL 3W2207 - Page 9

ABL 3W2207
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important InformatIon
5
At all times comply with local safety regulations for the country in which you operate
the wallbox.
For proper operation, the power supply for the wallbox must be protected in the
domestic power supply with a suitable MCB.
To disconnect the wallbox completely from the electricity grid, the power supply
must be interrupted using the upstream MCB and the internal RCCB.
Ensure that the rated voltage and rated current of the wallbox comply with the pa-
rameters of your local electricity grid and that the rated output is not exceeded dur-
ing the charging procedure.
The wallbox should not be installed in areas of high pedestrian traffic. Installation
along thoroughfares and marked escape routes should be especially avoided.
Never install the wallbox in a confined space. In particular, you must ensure that the
vehicle can be parked at a suitable distance from the wallbox for charging and con-
nected without any strain on the charging cable. The distance between vehicle and
wallbox should be at least 50 cm and no more than 5 m. You may deviate from this
recommendation depending on local conditions.
You must not under any circumstances make any changes to the housing or the
internal wiring of the wallbox: Any disregard of this instruction represents a safety
risk, fundamentally breaches the guarantee provisions and may void the warranty
with immediate effect.

Related product manuals