What to do if ABL eMH1 513 Battery Charger shows error display?
If the ABL Battery Charger displays an error, the charging station will restart charging after 30 seconds. If the problem persists after the restart, please inform your service provider.
How to troubleshoot ABL eMH1 513 Battery Charger with no LED indicator?
If there is no LED indicator on your ABL Battery Charger, consider the following potential causes: * **No power supply:** Test the upstream MCB and check the RCCB. * **LED indicator defective:** Inform your service provider.
Explains the meaning of safety symbols like DANGER, WARNING, and NOTE.
Covers safe operation, adherence to technical standards, and repairs by qualified personnel.
Defines the meaning of various warning signs displayed on the charging station.
Details the charging station's functionality according to IEC 61851-1, Mode 3.
Lists all items included in the EVSE 513 charging station package.
Warns about DC residual current and the necessary protection measures.
Recommends installation spots to protect the charging station from direct sunlight.
Provides step-by-step instructions on how to open the unit's housing.
Details the procedure for physically attaching the station to a wall.
Specifies the ideal height for mounting with a 3-m charging cable.
Outlines safe electrical connection steps and requirements.
Explains the charging steps and the meaning of different LED light states.
Guides on how to disengage and remove the charging coupler from its bracket.
Describes how and when to test the Residual Current Circuit Breaker.
Information on the security feature of a lockable panel.
Details storage/operating temperatures, humidity, voltage, and current ratings.
Mentions CE marking and availability of compliance declarations.
Provides instructions for environmentally responsible disposal of the device.
General| Charging power | 3.7 kW |
|---|---|
| Charging current | 16 A |
| Input voltage | 100-240V AC |
| Input frequency | 50/60Hz |
| Connector type | Type 2 |
| Number of charging points | 1 |
| Protection class | IP54 |
| Operating Temperature | -25°C to +50°C |
| Output Current | 16 A |
| Output Voltage | 230V AC |
| Protection | Overcurrent, Overvoltage |
To Next Page
