In terms of features, there is no difference between Push units with or
without a processor, the only difference is that units with a processor
can be used to make music without being connected to a computer.
For the sake of brevity, we will be referring to Push throughout this
manual without making a distinction between standalone units and
units without a processor unless explicitly necessary.
2 Setup
Push can be used either on its own in Standalone Mode, or it can be
connected to a computer in Control Mode.
After plugging in the included power supply, turn Push on via the yellow
button on the back.
Push will boot up in Standalone Mode the first time you turn it on. A
short onboarding tutorial will guide you through some of Push’s new
features.
Press and hold the power button for three seconds to turn Push off.
If you encounter any issues with Push, press and hold the power button
for ten seconds to force Push to turn off.
2.1 Connecting Push to a Computer
Turn on Push and use the USB-C cable to connect the hardware to
your computer. When using Push in Control Mode, it is recommended
to also connect the power supply in order to ensure maximum display
brightness and prevent battery drainage.
To Next Page
Loading...
Need help?
General
