ABM International INNOVA 22 User Manual

ABM International, Inc. Series: 1018, 1022 & 1026 V5.0
Model: Innova Longarm Quilting Machine Service Guide
Proprietary information of ABM INTERNATIONAL, Inc. furnished for customer use only.
No other uses are authorized without the prior written permission of
ABM INTERNATIONAL, INC.
1
ABM International, Inc.
INNOVA 18, 22 & 26 SERVICE MANUAL

ABM International INNOVA 22 Specifications

General

Brand	ABM International
Model	INNOVA 22
Category	Sewing Machine
Language	English

Summary

Tools Required for Maintenance

Installing a Needle in the Innova

Threading the Sewing Head

Oiling the Innova

Rotary Thread Tension Assembly

Removal of Rotary Thread Tension Assembly

Procedure for removing the rotary thread tension assembly from the sewing head.

Adjustment of Check Spring

Steps to adjust the check spring tension on the rotary thread tension assembly.

Adjustment of Thread Tension

Guidance on adjusting thread tension using the rotary tension nut.

Installation of Tension Assembly

Instructions for correctly installing the rotary thread tension assembly.

Setting the Needle Bar Height

Setting the Hook Timing

Adjusting the Hook Positioning Finger

Adjusting the Presser Foot Height

Setting the Needle Up Position

Adjusting the Handle Bar Height

Replacement of Handle Bar Button

Adjusting the Hook Drive Mechanism – Belt / Gear

Adjusting Belt Tension

Procedure for adjusting the tension of the hook drive belt.

Adjusting Tension Plate Alignment

Correcting misalignment of the tension plate to prevent belt noise.

Adjusting Belt Tracking

Information regarding belt tracking adjustments on tensioner pulleys.

Adjusting Gear Lash

Steps to adjust the gear lash for smooth operation and proper timing.

Sewing Head Axle Adjustment

Removal and Installation of Innova Parts

Needle Bar Removal and Installation

Instructions for removing and installing the needle bar.

Presser Bar Removal and Installation

Instructions for removing and installing the presser bar.

Take-up Assembly Removal and Installation

Procedures for removing and installing the take-up assembly.