10
Storing your steam mop
When the steam mop is not in use, push it up to the
upright position and place it on the cooling mat provided.
It will stop steaming.
If you are not using it for a long period of time, push the
power button and unplug the unit at the mains.
When you have finished using the steam mop, unplug it at
the mains.
Allow the microfibre mop pad to fully cool and then
carefully remove it from the mop head.
Empty any remaining water from the tank into a sink
before storing.
Wrap the power cord around the upper and lower cord
hooks.
Store upright in a protected, dry area or hang by the
handle.
Refer to the cleaning and care instructions on page 11.
To Next Page
Loading...