Features
Alarm Activation
When an alarm is activated, the Indoor Siren will activate its buzzer and the LED indicator will flash continuously
while the siren is alarming, (screaming). If the gateway is disarmed, the siren will stop screaming, if the gateway
is not disarmed the siren will stop screaming after 3 minutes, (Auto cutoff).
Audio Status Indication
The Siren will sound its siren during an alarm for 3 minutes when activated.
• For Burglar & Panic Alarm, the Siren gives a steady alarm sound.
• For Fire/Smoke, the Siren gives an intermittent alarm sound of 2-sec siren followed by a 1 sec interval,
cyclically during the alarm duration.
• The siren is silenced when either the 3 minute siren duration expires or when the gateway
is disarmed.
abode Indoor Siren Features and Controls
3
While operating the system, the Siren emits different beeping sounds to distinguish various statuses for the
user, see sound indications below.
You can enable or disable this beep feature using the abode web app.
The factory default volume for beeps is set off
Beeps Sound when:
Armed away or Armed Home - 1 Beep
Disarmed - 2 Beeps
Previous alarm earning - 3 second alarm sound
Entry / Exit sound - Count down beeps
How do I control the door chime sound on the indoor siren?
The gateway door chime is controlled using the web app sound settings, (Off, Low, or High) this also controls the
chime on the indoor siren (On or Off) but not its volume.
You can change these features by accessing the web app system settings, under sound settings, choose when
you would like the gateway and the indoor siren to provide the Chime sounds.
abode Systems Inc. Visit our support page for more information http://support.goabode.com/ 2016
abode reserves the right to update this product information at any time without notice.
To Next Page
Loading...