Above All LEOPARD Series User Manual

LED LEOPARD SERIES MINI FLOOD & WALL LIGHT
Instruction Manual
Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abovealllighting.com
Web: www.AboveAllLighting.com ©2016 ABOVE ALL. Inc. All rights reserved
SUITABLE FOR MODEL
1
WIRE CONNECTION
INPUT VOLTAGE: 120-277V,120V,277V, NON-DIMMING
SAFETY INSTRUCTION
Maintenance Caution
READ CAREFULLY BEFORE INSTALLING FIXTURE.
PLEASE KEEP THIS MANUAL FOR FUTURE USE.
Fixtures must be wired in accordance with the National
Electrical Code and all applicable local codes. Proper
grounding is required for safety.
THIS PRODUCT MUST BE INSTALLED IN
ACCORDANCE WITH THE APPLICATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION
AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
MAKE CERTAIN POWER IS OFF BEFORE
INSTALLING OR MAINTAINING FIXTURE.
CHECK THAT VOLTAGE IS COMPATIBLE WITH
FIXTURE DRIVER. USE APPROVED CONNECTORS
FOR ALL ELECTRICAL CONNECTIONS.
1. Review the wire connection before beginning, and
make sure xture is grounded properly.
2. For lighting controls, follow control instructions
carefully.
3. Turn power off and wait for xture to cool before
performing maintenance.
4. Maintenance must be done by professionals.
Make the following Electrical Connection:
a) Connect the voltage supply line to ACL in black.
b) Connect the voltage supply Neutral to ACN in white
c) Connect green ground lead to the supply ground lead.
INPUT VOLTAGE: 120-277V,120V,277V, DIMMING
Make the following Electrical Connection:
a) Connect the voltage supply Line to ACL in Black.
b) Connect the voltage supply Neutral to ACN in White
c) Connect Green ground lead to the supply ground lead
d) Connect the supply positive dimming lead to Dim+ lead
in Red
e) Connect the supply negative dimming lead to Dim- lead
in Blue.
INSTALLATION
ITEMS REQUIRED
Accessory Pack Included:
Wire Nut x 3(Non-dimming) / 5(Dimming)
O-ring x 2
Tools Prepared by Customer:
Phillips screwdriver
Electrical wiring tools
Water tight cord connector
Bracket attachment hardware
Appropriate tools

Above All LEOPARD Series Specifications

General

Brand	Above All
Model	LEOPARD Series
Category	Lighting Equipment
Language	English

Summary

Safety Instructions

General Safety Precautions

Read and follow all safety instructions before installing or maintaining the fixture. Ensure proper grounding and compatible voltage.

Maintenance Safety Caution

Turn off power, wait for fixture to cool, and ensure grounding before maintenance. Professional maintenance is recommended.

Electrical Wire Connection

Non-Dimming Wiring

Connect voltage supply line to ACL (black) and neutral to ACN (white). Connect green ground lead to supply ground.

Dimming Wiring

Connect line to ACL (black), neutral to ACN (white), ground to ground. Connect dimming leads (red/blue) to supply dimming leads.

Installation Items and Tools

Required Accessory Pack

Includes wire nuts (3 for non-dimming, 5 for dimming) and O-rings.

Customer Provided Tools

Requires Phillips screwdriver, electrical wiring tools, water-tight cord connector, and bracket attachment hardware.

Installation Options

Trunnion Installation

Mount to surface using trunnion bracket. Route wires, make connections, and adjust aiming angle using pivot screws.

Knuckle Installation

Mount to wall by drilling holes. Make electrical connections in the junction box. Adjust direction using pivot screws.

Junction Box Installation

Mount luminaire to wall by drilling holes on the junction box. Make electrical connections inside the box and screw cover tightly.