Technical specifi cation
The following technical data were measured on randomized test objects
and are typical data.
All measurements are made with main voltage
120/240 V 50Hz / 60Hz.
Clipping point of the product is set to a level where total har-
monic distortion (THD) is 0.2%.
Noise .....................................................................<100uV
Frequency response -3dB .....................................DC-1MHz
Slew rate ...............................................................100Vus
Channel separation (20Hz-20kHz) ........................>90dB
Dimensions
Width 432mm (17”)
Depth 320mm (12.6”)
Height 115mm (4.5”)
Weight 7kg (14)
The manufacturer reserves the right to alter these specifi cations
without further notice
14
To Next Page
Loading...