Abriblue OPEN Classic User Manual

OUT OF POOL AUTOMATIC SAFETY COVER
OPEN Classic
Installa on instruc ons
Please read carefully and keep for subsequent consulta on
Version 02/2013
AE-12-004-4GB/05-2014
S
l
a
t
t
e
d
c
o
v
e
r
s
c
o
m
p
l
i
a
n
t
Standard
NF P 90-308

Abriblue OPEN Classic Specifications

General

Brand	Abriblue
Model	OPEN Classic
Category	Lighting Equipment
Language	English

Summary

1. Preparing the pool

1.1 Electric connections and cable passages

Details on power supply, cable types, and passages for electrical connections.

2. Delivery and Reception

3. Assembling the roller

3.1 Offset plate option: assembly on the post

Steps for assembling the offset plates onto the support posts.

3.2 Fitting the shaft onto the posts

Instructions for fitting the motorised tube and shaft onto the posts, including lubrication.

3.3 Placing the roller on the pool

3.5 Offset plate option: fixture to the ground

3.6 Placing the threaded rods

3.7 Sealing the threaded rods

3.9 Adjusting and tightening the posts

Steps for adjusting post verticality and tube horizontality, then tightening nuts.

4. Electric connections

4.1 Box

How to connect the 230V power supply and 24V wires to the electric box terminals.

4.2 Motor and key switch

Instructions for connecting power and motor wires to the dominoes in the post.

4.3 Roller rotation test

5. Assembling the slats

5.1 Placing the slats on the water

5.2 Assembling the slats

Steps for clipping the slats together to form the cover, ensuring a secure fit.

5.4 Controlling the fit

5.5 Installing the stair slats

5.6 Slat orientation ski

5.7 Fixing the apron to the pool

5.8 Fixing the anti-lifting buckles

5.9 Fixing with the Coverlock system.

Detailed instructions for installing the Coverlock system, including harpoons and triggers.

6. Run stop adjustments

6.1 End of unrolling

6.2 Fixing the apron to the shaft

6.3 Adjustment of the end of rolling stop

7. Test instructions in the event of a malfunction

7.1 Checking the box

Detailed steps for testing the electric box, including fuses, voltages, and connections.

7.2 Checking the power supply cable between the electric box and the roller motor

How to test the cable connecting the electric box to the motor for voltage and integrity.

7.3 Checking the key switch

7.4 Direct check of the motor

Steps for directly testing the motor's functionality by applying power to specific wires.

8. Checks

3. Upkeep advice

4. Maintenance advice

5. Winterisation advice