Absaar AB-EJS260 - USB Port Functionality; Device Activation and Connection; Charging Devices via USB; 12 V Port Functionality

Operating instructions ABSAAR
10
Electrical equipment cannot be disposed of like household waste.
Pursuant to the European Directive 2002/96/EC for the disposal of
waste electrical and electronic equipment and its implementation in
national law, waste electrical products must be collected separately
and disposed of at collection points provided for this purpose.
Always dispose of the devices that have reached the end of their service
life at a dedicated collection point. Ask your local authorities or reseller
for advice on recycling. Recycle takes little effort on your part, for a big
difference to our world.
 IMPORTANT :
1. Always make sure that the capacity of the battery of the Jumpstarter is above 75%.
2. Recharge the internal battery of the Jumpstarter EVERY 3 MONTHS, even if you have not used the Jumpstarter.
3. Always make sure that clamps and the connector are properly connected before attempting to start up of the vehicle.
4.Iftheenginedoesnotstartupattherstattempt,waitfor1minutebeforetryingtostartitupagain.
5. After use in start-up aid mode, fully recharge the internal battery of the Jumpstarter as soon as possible.
6. The Jumpstarter is a start-up aid and cannot fully substitute the power of an original battery. If the battery of your vehicle
is completely discharged or faulty, the Jumpstarter will not have enough power to start up your vehicle.
8) WARRANTY TERMS & CONDITIONS :
1) The warranty covers all manufacturing and material defects. The manufacturer guarantees free replacement (of the parts or of
the entire product) for two years from the date of purchase. Shipping costs, however, will be borne by the customer.
2) Requests for warranty will be accepted only if they are accompanied by a proof of purchase (invoice or sales receipt).
3) The warranty does not cover repairs that are needed as a result of an accident, incorrect disassembly, damage caused by dropping
or shocks, improper use or the connection of the device to a supply voltage in excess of the indicated voltage.
4) The warranty does not include compensation and/or refunds, whatever the circumstances.
For damages : Please contact your dealer.
6) USE OF THE USB OUTLET :
• Press the on/off button
(6)
once to turn on the device
• Connect the charging cable to the USB outlet
• Charge your device
7) DESCRIPTION AND USE OF THE 12V OUTLET :
• Press the on/off button
(6)
once to turn on the device
• Connect the charging cable to the 12V outlet
(5)
• Charge your device
8) RECHARGING OF THE EJS-260 :
• Turn off the device by pressing the on/off switch
(6)
for more then 3 seconds
• Connect the 12V charging cable to the DC input port
(2)
and charge the device
• Monitor the charging status by the led indicator
(3)
and disconnect the EJS-260 when the device is fully
charged