EasyManua.ls Logo

ABSINA A3800 - User Manual

ABSINA A3800
13 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Art.-Nr. / Part no.: 301008
BATTERY CHARGER
A3800
BEDIENUNGSANLEITUNG /
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the ABSINA A3800 and is the answer not in the manual?

Summary

Explanation of Symbols

CE Marking

Indicates compliance with EU directives.

Read Manual

Instruction to read the manual carefully before use.

Fuse Information

Specifies the product contains a T3 15A 230V fuse.

Protection Class II

Product has reinforced insulation and no protective earthing required.

IP65 Rating

Product is protected against dust and splash water.

Disposal Instruction

Do not dispose of in household waste; use approved facility.

Cautionary Symbol

Warns of dangerous situations if instructions are not followed.

Intended Use

Safety Information

Technical Data

Connecting the Battery

Clamp Connection Order

Steps for connecting positive and negative clamps to the battery.

Power Connection

Connect the mains cable to a suitable socket after battery connection.

Disconnecting Procedure

Reverse order for disconnecting: mains, then clamps (negative, positive).

Charging Modes and Operating Instruction

Standby Mode

Unit is in standby when connected to mains; no charging occurs.

Normal Mode

Charger detects battery voltage and starts automatic charging.

COLD;AGM Mode

For batteries in cold temperatures or AGM batteries.

12 V SMALL Mode

For small 12V batteries with lower charging current.

12.8 V LITHIUM & RECOVER Modes

Special modes for lithium batteries and battery recovery.

Charging Mode Details

6 V NORMAL

For 6V lead-acid batteries, standard charging.

6 V COLD;AGM

For 6V batteries in cold or AGM types.

12 V NORMAL

For 12V lead-acid batteries, standard charging.

12 V COLD;AGM

For 12V batteries in cold or AGM types.

12 V NORMAL SMALL

For smaller 12V lead-acid batteries.

12 V COLD;AGM SMALL

For smaller 12V batteries in cold or AGM types.

12 V RECOVER

Mode to restore old or sulphated 12V batteries.

12.8 V LITHIUM

Mode for 12.8V Lithium Iron Phosphate (LiFePO4) batteries.

Memory Function and Overview

Memory Function

Charger resumes last selected mode if power is interrupted.

Function Overview

Details on maintenance, repair, soft start, detection, and monitoring.

Charging Time Table

Approximate charging times for various battery capacities.

Key Features and Safety

Optimisation

Enhances battery life by stabilising internal battery chemistry.

LED Charge Status Display

Indicates battery charge level using four LEDs.

Error Message Indicators

LEDs display error messages related to charging issues.

Safety Shutdown & Protection

Automatic shutdown and protection against various hazards.

Maintenance and Care

Warranty Information

EU Declaration of Conformity

Manufacturer Information

Details of ABSINA GmbH, the manufacturer.

Product Identification

Model number and apparatus type.

Conformity Legislation

Compliance with EU directives for RoHS, Low Voltage, EMC.

Harmonised Standards

Standards applied for safety and electromagnetic compatibility.

ABSINA A3800 Specifications

General IconGeneral
Output VoltageDC 5V
Power12W
Input VoltageAC 100-240V
Output Current2.4A
Charging Ports2
Protection FeaturesOver-current protection, Over-voltage protection, Short-circuit protection
CompatibilitySmartphones, Tablets, and other USB-powered devices