Page 6 of 34
Profile Blades are a seasonal renovation attachment that decompacts without up-ending the
surface profile. For light renovation work, the patent-pending Profile Blade attachment yields
unparalleled de-compaction results by slicing the complete profile of the infield material from
1/2" up to 3 inches under the infield surface. Occasionally uncompacting the infield surface
encourages a quick-draining and consistent-playing infield. Profile Blades can also cut weeds
and grass at the root level to remove creeping grasses from infields, and warning tracks; to
help eliminate build-up along the outfield edge.
The Scarifier Teeth make easy work of extreme hardpan and vegetation outside of the field.
The rippers enable the ABI Force to be used to maintain gravel roads, parking lots, and even
complete seedbed preparation jobs. These teeth temporarily replace the VibraFlex™ groomer
or Profile Blades™ and are adjustable from 0 - 4" for optimum working depth. The bolt on tips
are easily replaced as needed.
The Multi-function Rake is not typically used for daily grooming, but is invaluable during
infield renovation and off-the-field work. Because the rake is mounted directly to the mid-
mount hydraulic system, it may be pitched into a wide variety of positions to tackle a number
of jobs. It pulverizes clumps of material during infield renovation work, can be pitched
vertically to back blade material from high areas and fill into low areas, it can pull off loose
vegetation and debris into piles, and it creates an ideal finish on gravel parking lots and for
other heavy dirt work. The rake is constructed of 1/2" hardened steel for long life and is
replaceable in individual sections.
Rear-mount System (Manual or Hydraulic):
The rear-mount system allows for a variety of quick-swap finishing
attachments to be pulled for grooming and then manually latched out-of-
play for transport. However, if ultimate efficiency is of critical concern, our
optional rear hydraulic lift allows fingertip control of these attachments.
This optional rear-lift hydraulic system makes engaging and disengaging
any finishing attachment for either grooming or transport quick and easy.
Rear-mount Quick-swap Attachments:
The Rigid Drag Mat with leveling bar is an all-purpose attachment to level, smooth, and
finish. This drag mat is 6' wide and 1.5' long and is designed to float material from high areas
into low areas without following small contours of the ground. The integrated leveling bar
also serves as a nearly indestructible tow bar and allows the steel mesh to be replaced once
worn.
The Fine Finish Broom creates the perfect finish in both high and low moisture conditions on
well-maintained surfaces. This broom is 7' wide and offers 3 rows of bristles. The mounting
arms are adjustable to set the exact working angle desired and the broom has an ideal weight
for the perfect amount of down pressure needed for beautiful performance. The 3 ideally
spaced rows of easily replaceable bristles will help to float a small amount of material into low
areas and finish the infield in a pristine "game ready" manner.
To Next Page
Loading...