To Next PageTo Next Page
Need help?Do you have a question about the Absolute HIBLOW HP Series and is the answer not in the manual?
Identifies components of the HP Series pumps using an exploded diagram and a numbered parts list for assembly reference.
Provides essential safety warnings and precautions before and during the chamber block replacement procedure.
Details the initial steps for removing the chamber blocks, including loosening screws and detaching the L-tube.
Explains how to detach diaphragm mounting blocks from the actuating rod and separate them.
Guides on correctly fitting the actuating rod and securing the diaphragm mounting blocks with nuts and washers.
Details the process for replacing a broken safety pin, including checks and installation of new parts.
Covers installing the sound absorber, upper housing, and filter components to finalize the chamber block replacement.
Provides essential safety warnings, including handling hot components and potential magnetic interference.
Details the process for removing electromagnets, including cutting wires and loosening nuts.
Guides on mounting new electromagnets, installing the SP switch, and connecting wires via soldering.
Confirms the successful completion of the electromagnet replacement procedure.
General| Category | Water Pump |
|---|---|
| Series | HP Series |
| Manufacturer | Absolute |
| Type | Air Pump |
| Air Inlet Port Size | Varies by model |
| Materials (Wetted Parts) | Varies by model |
| Weight | Varies by model |
| Applications | Wastewater treatment |
| Application | Aeration |
| Max Flow Rate | Varies by model (e.g., HP-60: 60 L/min, HP-100: 100 L/min) |
