Abus FUBE35001A User Manual

FUBE35001AFUBE35001A
abus.comabus.com
Eine alternative Inbetriebnahme sowie detaillierte Informationen ndest Du in der
Bedienungsanleitung auf abus.com oder in der App.
Vous trouverez une solution alternative pour la mise en service, ainsi que des
informations détaillées dans le manuel d’utilisateur sur abus.com ou via notre
application.
Een alternatieve ingebruikname en gedetailleerde informatie vind je in de
gebruikershandleiding die op abus.com en in de app.
Per informazioni su una messa in funzione alternativa o sui dettagli del prodotto,
consultare le istruzioni per l‘uso disponibili all‘indirizzo abus.com o nella app.
You can nd an alternative start-up process and detailed information in the user
manual at abus.com or in the app.
Alternativ idritagning samt detaljerede oplysninger nder du i betjeningsvejledningen
på abus.com eller i appen.
En el manual de instrucciones disponible para descargar en abus.com y en la App
podrás encontrar una puesta en funcionamiento alternativa, así como información más
detallada.
Alternativ idritagning samt detaljerad information nns i bruksanvisningen på
abus.com och i appen.

Abus FUBE35001A Specifications

General

Interface	RF Wireless
Input type	Press buttons
Product color	White
Housing material	Acrylonitrile butadiene styrene (ABS)
Backlight buttons	No
Brand compatibility	ABUS
Compatible products	Smartvest
Remote control proper use	Security system
Certification	CE
Maximum range	100 m
LED indicators	Yes
Operating frequency	868 MHz
Number of devices supported	-
Battery type	CR2032
Power consumption	15 mA
Number of batteries supported	1
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	14 mm
Width	30 mm
Height	60 mm
Weight	22 g

Summary

Smartvest App Setup and Device Pairing

Start App and Initial Selection

Open the Smartvest app, enter PIN if required, and select the desired system panel.

Settings and Component Management

Access settings by entering the password and unlock, then navigate to add components like remote keys.

Device Naming and Pairing

Assign a name and location to the device, then initiate pairing by activating the remote key.

Connection and Important Notes

Connection is established; notes mention skipping steps if automatic login is enabled.