Need help?Do you have a question about the Abus Smartvest and is the answer not in the manual?
General| Certification | CE, GS |
|---|---|
| Maximum power | 3680 W |
| Product color | White |
| LED indicators | Yes |
| AC input voltage | 250 V |
| Connector gender | Male/Female |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Sockets quantity | 1 |
| Plug connector type | Type F |
| Maximum indoor range | 30 m |
| Maximum outdoor range | 100 m |
| RF transmission frequency | 868 MHz |
Weight and Dimensions| Depth | 31 mm |
|---|---|
| Width | 55 mm |
| Height | 99 mm |
| Weight | 129 g |
Welcome message, product purpose, and legal disclaimers.
Explains warning symbols and defines the product's intended application.
Crucial safety warnings and general precautions for operating the device safely.
Guidance on power supply, cable management, and child safety to prevent electrical hazards.
Advice on suitable locations, environmental conditions, and proper battery handling.
Details of the main control panel's front and rear features, LEDs, and mounting options.
Description of the power switch, its socket, LED indicators, button functions, and repeater mode.
Information on the magnetic contact sensor, its signal LED, battery, and replacement procedure.
Details of the motion detector, including its catch, pair button, tamper contact, and battery replacement.
Information on the smoke/heat detector and its installation instructions.
Description of the siren, its LED, loudspeaker, pair button, tamper contact, and battery replacement.
Details of the remote key, its buttons, signal LED, battery, and replacement.
Guide to downloading and installing the required mobile application for system setup.
Steps for connecting the Smartvest to your router and power supply for initial configuration.
Instructions on how to add and connect various Smartvest sensors and devices to the system.
Managing system settings, including removing components and app configuration options.
Instructions for installing the main Smartvest unit, including free-standing and wall mounting.
How to plug in and connect the power switch to a socket and desired consumer.
Guidelines for installing the magnetic contact sensor on windows or doors using pads or screws.
Steps for installing the motion detector, including adhesive and drill mounting methods.
Instructions for installing the smoke or heat detector.
Guide to installing the siren, including drill mounting and connecting the power supply.
Simple guide for installing the remote key by attaching it to a keyring.
Understanding the app's navigation structure, menu switching, color codes, and footer controls.
Interpreting the app's status display for armed, disarmed, and internal arming states.
Using hotkeys for quick actions and viewing system faults within the app.
Navigating through room overviews and details to check component status and location.
Accessing live camera views, controlling camera functions, and managing recordings.
Managing emergency and custom contacts for quick dialing during alarms.
Reviewing the event log, understanding color codes, and exporting event data.
Responding to alarms, viewing event chains, accessing emergency contacts, and disarming the system.
Accessing and managing Smartvest settings, contacts, and the user manual via the app.
Adding, configuring, and managing individual Smartvest components like cameras, sockets, and detectors.
Setting up and customizing hotkeys for automated actions triggered by sensors.
Creating automated sequences of actions based on sensor triggers, like turning lights on.
Scheduling specific actions for power switches, such as activating lights at certain times.
Configuring network parameters such as IP address, subnet mask, and gateway.
Changing security codes, passwords, and defining system reactions to different statuses.
Setting up push and email notifications for status changes or alarms.
Updating firmware, adopting time, and using special modes like maintenance or test mode.
Specifications for the Smartvest control panel including battery, operating temp, frequency, dimensions, and power.
Specifications for the power switch, including connections, operating temp, frequency, dimensions, and power.
Specifications for the magnetic contact, including battery, operating temp, frequency, dimensions, and installation.
Specifications for the PIR motion detector, including battery, operating temp, detection type, frequency, and dimensions.
Specifications for the smoke/heat detector, including battery, operating temp, detection range, frequency, and dimensions.
Specifications for the siren, including battery, operating temp, frequency, luminous colour, and dimensions.
Specifications for the remote key, including battery, operating temp, frequency, dimensions, and installation.
To Next Page
