Abus Smartvest User Manual

55
English
Advanced settings
Network settings
The Smartvest is set to DHCP by default. This means that the
Smartvest is automatically assigned an IP address, subnet mask,
gateway and DNS server by your router.
Should you wish to enter these manually, switch DHCP to "Off"
and enter your own details.
Note
We recommend leaving the DHCP function set to
"On".
IP address
For the IP addresses available for the Smartvest IP address, refer
to your router settings.
Subnet mask
The subnet mask is dependent on the network to which you are
connected. The standard subnet mask is: 255.255.255.0.
Gateway and DNS server
For the gateway and DNS server, you usually enter your router's
IP address.
Example of a manual entry:
IP address: 192.168.0.50
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1
DNS server: 192.168.0.1
To complete the process, tap "Save" to store the details.

Abus Smartvest Specifications

General

Certification	CE, GS
Maximum power	3680 W
Product color	White
LED indicators	Yes
AC input voltage	250 V
Connector gender	Male/Female
Housing material	Acrylonitrile butadiene styrene (ABS)
Sockets quantity	1
Plug connector type	Type F
Maximum indoor range	30 m
Maximum outdoor range	100 m
RF transmission frequency	868 MHz

Weight and Dimensions

Depth	31 mm
Width	55 mm
Height	99 mm
Weight	129 g