Up to four cameras can be displayed in the camera overview. In
the settings (see chapter 5.5, Advanced settings), you can add
four cameras in the contact overview or edit the settings for the
cameras already available.
You can access the live view with the various camera functions
by tapping the relevant camera.
Live view
You can control the camera by using your finger to swipe left,
right, up or down across the live view.
Move two fingers away from each other on the screen to zoom in
on the camera image.
Actions
Keep this button pressed to speak to people on-site
via the camera's loudspeaker.
Tap this button to listen to the camera's recorded
audio.
Press this button to save or retrieve positions that
have just been set (Preset 1, 2, 3).
Tap this button to save a snapshot on your end
device.
Press this button to start a one-minute recording.
Note:
Recordings are only possible if a microSD card has
been inserted in the camera. The "Rec" button will not
appear otherwise.