Event overview
When calling up the event list, the 100 most recent events are
displayed.
To view older events, use the search function. The Smartvest
alarm control panel stores a maximum of 1000 entries.
Camera events will be loaded directly from the
camera into the event overview and updated.
Depending on the network connection, it may take
several minutes for a new video to be displayed.
Motion detector events are not listed in the event
overview.
Use test mode to carry out the function test. (See
chapter 1.4., Motion detector.)
Components which have triggered an alarm status are marked
red in the event overview.
Components not transmitting a signal to the Smartvest or whose
battery is dead are marked yellow in the event overview.
Tap the export symbol in the bottom left-hand corner to save
the current event overview on your end device in a text file.
Tap the search symbol in the bottom left-hand corner in order
to search events within a specific time period. Tap "Search" to
carry out the search or the arrow symbol to return to the event
overview.
Updating manually
You can update the event list manually by swiping downwards.
This is particularly helpful when loading camera events.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
