Abus Smartvest User Manual

16
English
2. Start-up
Before installing your Smartvest and detector, follow the steps below to start up your Smartvest and
pair components with the Smartvest.
Installing the Smartvest App
For the Smartvest, there is an app called "Smartvest" available for
download from the Google Play Store and the iOS App Store. This
app can be used on smartphones and tablets, referred to as "end
devices" from this point on.
For installation, go to the Google Play Store or the iOS App Store
and search for "Smartvest".
Install the Smartvest App.
Note
Please note that the following operating systems are
a minimum requirement for running the Smartvest
App:
Apple iOS 7
Android 4.0
Setting up the Smartvest
First connect the LAN cable provided on the underside of the
Smartvest and connect this to your router,
then connect the power supply unit provided.
Note
Ensure that the DHCP function is activated on your
router as otherwise it will not be possible to connect
to the Smartvest.
Only start setting up the Smartvest via the app when
the green power LED lights up continuously and the
alarm panel beeps twice.
There is no double beep sound if integrated into a
local network without Internet access.

Abus Smartvest Specifications

General

Certification	CE, GS
Maximum power	3680 W
Product color	White
LED indicators	Yes
AC input voltage	250 V
Connector gender	Male/Female
Housing material	Acrylonitrile butadiene styrene (ABS)
Sockets quantity	1
Plug connector type	Type F
Maximum indoor range	30 m
Maximum outdoor range	100 m
RF transmission frequency	868 MHz

Weight and Dimensions

Depth	31 mm
Width	55 mm
Height	99 mm
Weight	129 g