8. Testing the signal strength
The info module can display the signal strength of signals
received from the alarm centre.
Important:
Make sure that the alarm centre is taught to the info
module.
Ensure that a jumper is inserted for selecting the
partition.
8.1. Carrying out a signal strength test
As soon as the info module has received a signal from
the wireless alarm centre, press the button for displaying
the signal strength on the info module (use a long, sharp
tool that fits through the hole on the bottom of the
housing).
The LEDs display the strength of the received signal. The
more LEDs are lit (from bottom to top), the stronger the
To Next Page
Loading...