20 21
X =
7-12 mm
Measure the two dimensions, inside
and outside, from the centre of the
cylinder’s mounting screw, including
side. Add at least 7 mm on the inside
to the dimension measured to get the
closest cylinder length.
should then be a 30/40 cylinder.
Cylinders come in 5mm increments. To
the next standard length, a 40/40
cylinder.
2.2a
2.2b 2.2c
1.
2.
3.
4.
1.
2.
3.
4.
2.2d 2.2e
check!
Dim.
outside
Dim.
inside
check!
2.3a
2.2a
2.2a
2.2a
ok /
not ok
continue
with
2.3a 2.3b
Y =
4 - 7 mm
Y
2.3c 2.3d
Y =
4 - 7 mm
Y
2.3e
positions for
serrated
and reversible
keys!
Warning! ABUS accepts no liability for damages.
Obtain consent from your landlord if applicable.
2.3
To Next Page
Loading...
