EasyManua.ls Logo

Abus IPCB62520 - Page 81

Abus IPCB62520
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
81
7.4.3.3 Port
HTTP port: the default port for HTTP transmission is 80. If several IP cameras are
located on one subnet, each camera should have its own unique
HTTP port.
RTSP port: the default port for RTSP transmission is 554. If several IP cameras
are located on one subnet, each camera should have its own unique
RTSP port.
HTTPS port: The default port for HTTPS transmission is 443. If several IP cameras
are located on one subnet, each camera should have its own unique
HTTPS port.
Server port: The default port is 8000. If several IP cameras are located on one
subnet, each camera should have its own unique server port.
If the camera is to be accessed via routers (e.g. from the internet to the local network),
port forwarding must be set up for the HTTP, RTSP and server port in the router. If
HTTPS is also being used, port forwarding must be set up
f
or the HTTPS port too.

Table of Contents

Related product manuals