82
7.4.3.4 NAT
Enable UPnP: enables or disables the UPnP function. When the UPnP function is
enabled, the network camera can be found on Windows networks.
UPnP name: assigning a UPnP name, which the camera uses to appear on the
network via UPnP.
Enable port mapping: The NAT (Network Address Translation) or port mapping function
automatically sets up port forwarding for access from the Internet
to the camera in the router (if the router supports this).
Mapping type: Auto: automatic assignment of all ports
Manual: manual assignment of all ports
To Next Page
Loading...
