20 21
1.
2.
+
Do not touch
sensitive com-
ponents!
+
Attention
3. Automatic mode:
The remote control transmits when
motion is detected (transmits for approx.
8 seconds aer last movement).
The remote control also transmits aer
the button is pressed (transmits for
approx. 5 seconds). The LED will ash
green twice to conrm.
4. Low Battery:
If the battery power is low, the remote
control will switch to manual mode to
conserve power.
LED signalling when button is pressed:
ashes red once. Replace the 3V CR2032
battery immediately with a new one
(→ see Battery replacement).
Battery replacement
Lift the lid, do
not twist!