10
Dip switch function – 75 Ω HI-Z Impedance switch
Switch position 75 Ω
Set the switch position of the impedance switch to 75 Ω, if the BNC input is
connected to a camera and the BNC output stays free.
Switch position HI-Z
Set the switch position of the impedance switch to HI-Z, if the BNC input is connected
to a camera and the BNC output is connected to a video recorder or a different BNC
terminal device.
Warning
• For indoor use only
• Do NOT open the casing
• Do NOT use near water
• Do NOT insert sharp objects
To Next Page
