16 17
DIN L
1.
2.
Assembly
1.
2.
Dismantling existing handle
2.1 a
2.1
Place handle
to „closed“
position before
removing
2.1 b
L
L = _____ mm
2.1 c 2.1 d
2.2 a
Icon explanation:
Caution! Further fitting / using details
2.2
2.2 c 2.2 d
2.2 a
L = _____ mm
L
2.2 b
2.1 d
Installation of the gear box
Before using the actuator, pull the window in from the outside. When leaving
push on the window/patio door or hold the window handle during operation
of the motor. There is danger from moving parts.
WINTECTO One can be upgraded to a security variant. Additionally purchase
the corresponding retrot kit and a bar kit to upgrade your window to make
it burglar-resistant.
Contact a specialist company if necessary.
status at the time of printing. The printed manual may be outdated at the time
of the product’s entry into service due to updates and further developments.
We therefore ask you to visit our website and enter „WINTECTO
One
of the installation and operating instructions on the product page under the
„Downloads“ column.
To Next Page
Loading...
