AC Infinity CLOUDLAB 642 - Step 9: Add Supports and Tray; Step 10: Mount Controller

13
TENT SETUP
STEP 10
Mount your controller onto the included bracket.
Use the included screws to mount an AC Infinity
controller. Use the Velcro adhesive to attach a
non-AC Infinity controller.
Refer to page 15 for mounting locations of your
controller.
Controller Not Included
STEP 9
Add the roof support beams (E) then (F). Insert
the spill pool into the tent and secure the Velcro
straps around the poles.
E
E
F
F
F