Need help?Do you have a question about the AC Infinity CLOUDLAB 642 and is the answer not in the manual?
General| Model | CLOUDLAB 642 |
|---|---|
| Lightproof | Yes |
| Frame Material | Steel |
| Vent Ports | 4 |
| Viewing Window | Yes |
| Material | Mylar |
| Door | Zippered |
| Floor | Removable |
Thick steel tubes and connectors provide a sturdy structure, supporting up to 100 pounds.
Various poles (A, B, C, D, E, F) with specific quantities for CL844/866 frame assembly.
Insert eight (A) poles into corner (D) pieces to create two bases, ensuring feet face down.
Insert (B) poles into Base One and (C) poles into Base Two.
Guide Base One into the tent floor, aligning its corners with the tent's corners.
Insert Base Two poles into Base One poles to complete the tent frame assembly.
Pull the tent roof over the assembled frame.
Mount controller to bracket using screws or Velcro adhesive.
Slide the controller bracket assembly into the tent straps below the logo.
Route fan power connector and probe cables through the opening to the controller.
Instructions for mounting AC Infinity controllers to the bracket and non-AC Infinity controllers with Velcro.
Product is free from manufacturing defects for two years from purchase date.
To Next Page
