32
PROGRAMMING
1. POWER BUTTON
Switches between the OFF and
ON modes. Pressing this button
will bring the controller to OFF
mode.
5. PROBE TEMP.
Displays the current
temperature that the probe is
detecting. Shows “--” if no probe
is plugged in. Includes a trend
indicator that signals a rise,
steady, or fall in temperature
within the last hour.
4. UP/DOWN BUTTONS
Adjusts the value of your
current mode. The up button
increases and down button
decreases the setting. Hold
both to reset values to OFF
or 0.
8. FAN SPEED
Displays the current speed
in which the fan is running.
Includes a trend indicator that
signals if the fan is currently
rising, falling, or holding
steady.
7. ALERT ICONS
Displays alerts and statuses
of the controller, including the
controller lock, CLIMATE alert,
and TIMER alert.
10. USER SETTING
Displays the value you have set
for the current mode you are in.
Press the up or down button to
adjust the value.
9. COUNTDOWN
Displays the countdown of the TIMER TO
ON, TIMER TO OFF, or CYCLE mode
activates or deactivates the fan. TO ON
shows the amount of time left before the
fan turns on. TO OFF shows the amount
of time left before the fan turns off.
6. CONTROLLER MODE
Displays the controller's
current mode. Pressing the
mode button cycles through
the available modes.
3. SETTING BUTTON
Cycles through the controller’s
settings: DISPLAY, F/C,
CALIBRATION, and
TRANSITON.
2. MODE BUTTON
Cycles through the controller’s modes:
OFF, ON, AUTO TEMPERATURE (2
Triggers), TIMER to ON, TIMER to
OFF, CYCLE (ON and OFF).
1
2
3
4
6 7 8
9
10
5
B-SERIES
To Next Page
Loading...
