AC Infinity CONTROLLER 76 User Manual

17
CYCLE MODE (ON AND OFF)
In this mode, set an ON duration and an
OFF duration for your device to cycle through
continuously. Press the up or down button to first
set a duration for your device to be on and then
press the mode button again, to set a duration for
device to be Off.
The countdown will begin if no buttons are
pressed for 5 seconds. Press the up or down
button to set a countdown for your device to turn
on. Then press the mode button and use the
up or down button to set a countdown for your
device to turn off. Leaving the CYCLE mode
while the countdown is running will pause it until
you return to this mode.
ON
PM
TO
OFF
CYCLE
OFF
TO
ON
OFF
PM
CYCLE
TO
ON
ON
PROGRAMMING

AC Infinity CONTROLLER 76 Specifications

General

Brand	AC Infinity
Model	CONTROLLER 76
Category	Control Unit
Language	English