Need help?Do you have a question about the AC Pro AWH18QD-D3DNA3G/I and is the answer not in the manual?
Details the YV1FB9F remote controller, its display icons, and buttons.
Introduces the YAN1F6F remote controller, its display icons, and buttons.
Guides on downloading, installing, and registering the GREE+ app for smartphone control.
Covers customizing the app, adding units, operating modes, and temperature settings.
Details on operating modes, temperature adjustment, Fahrenheit/Celsius display, and fan modes in the app.
Explains special functions like Ventilate, X-FAN, Display Light, Energy Saving, Freeze Guard, Vertical Swing, and Sleep Mode.
Instructions on how to program ON/OFF timers with specific days and times using the app.
Covers activating humidify mode and selecting Intelligent, Continuous, or Manual functions.
How to control and set the indoor noise level using the GREE+ app.
Explains customizing airflow direction and coverage using the Area Fan feature in the app.
Overview of core operating modes (Cooling, Drying, Heating, Fan) and controls (Buzzer, Sleep, Timer, Memory).
Details on I Feel, Defrosting, Refrigerant Recovery, Ambient Temp Display, Off-Peak, SE Mode, X-Fan, Turbo, and 8°C/46°F Heating.
Covers temperature compensation, judgment controls, basic functions (Cooling, Dehumidifying, Air Supplying, Heating).
Explains Defrosting, Control Logic, Modes (Cooling, Dehumidifying, Heating), Fans, 4-Way Valve, and Evaporator Protection.
Details starting estimation, frequency limitations, overload protection for cooling and heating.
Covers module overheating, compressor overload, phase current protection, and starting failure protection.
Details protection for starting failure, out-of-step, voltage abnormality, 4-way valve, PFC, and sensor failures.
Explains the conditions for electric heating in the chassis and compressor.
Describes the LCD display symbols and the layout of buttons on the wired controller.
Instructions for On/Off, Mode, Temperature, Fan, and Timer settings using the wired controller.
How to adjust Swing, activate Sleep, and use Turbo functions via the wired controller.
Instructions for E-heater and Blow settings using the wired controller.
Steps for connecting the signal line and physically installing the wired controller.
Explains how error codes are displayed on the LCD screen and troubleshooting advice.
General| Brand | AC Pro |
|---|---|
| Model | AWH18QD-D3DNA3G/I |
| Category | Remote Control |
| Language | English |
To Next Page