Need help?Do you have a question about the ACA ALLERTOR 125 and is the answer not in the manual?
General| Type | Electronic siren |
|---|---|
| Power | 125 W |
| Operating Voltage | 12 VDC |
| Weight | 2.5 kg |
| Current Consumption | 10.5A |
Detailed specifications including weight, dimensions, acoustical, motor, and electrical data.
Describes the drive mechanism and rotation speed of the siren assembly.
Lists items that are typically supplied with the siren assembly.
Lists materials and components necessary for installation.
Provides guidance on storing the siren unit safely.
Refers to a separate warranty statement for service information.
Key safety warnings, including lifting and ear protection during testing.
General considerations for ensuring satisfactory siren operation.
Details on electrical power needs and potential charges for distance.
Requirements for ensuring convenient access for periodic siren servicing.
Guidance on choosing the best location and types of mounting structures.
Details for mounting the siren on a flat roof, considering load and snow levels.
Information on custom-built mounts for parapet installations.
Guidelines for using a chimney as a mounting support, considering smoke.
Considerations for mounting the siren on a tower or tank structure.
Details for constructing a support platform for siren mounting.
Illustrates a work platform and siren support structure with material list.
Shows a wooden pole setup with a service platform for siren mounting.
Provides details on how to lift and position the siren assembly.
Details regarding the mechanical and electrical connections for installation.
Exploded view of the siren assembly with key components labeled.
Information about assembling the horn onto the siren assembly.
Details about the screened air intake and outlet components.
Identification of the motor, gear reducer, and associated parts.
Instructions for mounting the siren using a mounting plate and bolts.
Details for mounting the siren on a wooden pole with a work platform.
Considerations for roof mounting, including load capacity and sub bases.
Procedures for lifting the siren assembly, especially when mounted on a pole.
Information on wiring and mounting the electrical control enclosure and conduit.
Steps for performing a preliminary test of motor rotation before final wiring.
Instructions for final wiring, connecting signal sources, and testing operation.
Explains how the siren is actuated and controlled via various systems.
Details on lubricating bearings, gear reducer, and drive chain.
How to adjust the drive chain tension for proper operation.
Steps for cleaning collector rings and brushes to resolve operational issues.
Lists possible causes and corrective procedures for motor start failure.
Identifies causes and solutions for erratic siren operation.
Outlines causes and corrective actions when the siren sounds but doesn't rotate.
General guidance on disassembling, repairing, and reassembling the siren.
Procedures for preparing the siren for relocation or shipping.
Basic precautions for storing the siren unit.
Lists components of the control panel for a 3-phase, 2-signal siren.
Lists components for the control panel of a single-phase, 2-signal siren.
Lists components for the control panel of a 3-phase, 3-signal (yelp type) siren.
Detailed list of parts for the siren assembly itself.
Lists common hardware items used in the siren assembly and their quantities.
To Next Page