acaia Orbit - Safety Information

Setting Up the Orbit
Attach the spout
extender to the Orbit
spout.
(Optional)
*Note: It is advised to
remove the spout extender
when using with the Lunar
scale in Grind-By-Weight
mode.
Place the Orbit on a
flat, stable surface.
Place the 58 mm
dosing cup on the
base of the Orbit.
Plug into a
100V~240V AC
power source.
Click the Orbit
button in the front.
When the button
light is on, you are
ready to go.
Turn on the main
power switch at the
back.
3