acaia Orbit - Setting Up the Orbit

Setting Up the Orbit
7
Place the Orbit on a
flat, stable surface.
Attach the spout
extender to the Orbit
spout.
Plug into a
100V~240V AC
power source.
Apply the Dosing
Cup Magnetic Pad
under the 58 mm
dosing cup and
place the cup on the
base of the Orbit.
Turn on the main
power switch at the
back.
Click the Orbit button
in the front. When the
button light is on, you
are ready to go.
Note:
• Acaia tests every unit with coffee beans during the quality control process. Some ground
coffee may remain in the grinder or the packaging.
• Please avoid setting the dial beyond the burr touching point.