Accedian MetroNID TE - User Manual

1
EtherNID™
Administrator’s Guide
for the
EtherNID™ EE
EtherNID™ GE
MetroNID™ TE
MetroNID™ TE-R
MetroNID™ TE-S

Summary

EtherNID Hardware Overview and Installation

Hardware Overview: Front and Rear Panels

Powering and Restarting the EtherNID

Procedures for powering the unit, restarting, and factory resets.

EtherNID Management and Configuration

Management Web Interface Access

Introduction and steps to access the EtherNID management interface.

DNS and Interface Configuration

Certificate Management and System Control

EtherNID Monitoring and Traffic Filtering

Service Mapping and CoS Profiles

Bandwidth Regulators and Traffic Shaping

Configuring bandwidth regulators and traffic shaping policies.

Traffic Filters (Layer 2 and IPv4)

Bandwidth Policing Configuration

EtherNID Operations, Administration, and Maintenance

OAM Configuration and Instances

Viewing and configuring OAM instances and their parameters.

Loopback Configuration and OAM Events

Configuring loopbacks and monitoring OAM events and status.

RFC-2544 Performance Testing

RFC-2544 Generator Configuration

Configuring the RFC-2544 packet generator for performance tests.

RFC-2544 Monitor Configuration

Configuring and viewing RFC-2544 monitors for test measurements.

RFC-2544 Testsuite and Reports

Managing RFC-2544 test suites and generating test reports.

EtherNID Performance Assurance Agent (PAA)

PAA Configuration and Probes

Configuring PAA probes for network performance measurement.

PAA Status and Results

EtherNID Traffic Shaper Configuration

Traffic Shaper Configuration and Statistics

Configuring traffic shaping parameters and viewing statistics.

EtherNID Connectivity Fault Management (CFM)

CFM Continuity Fault Management

Managing CFM continuity fault detection and configuration.

CFM Configuration: MD, MA;MEG, MEP

EtherNID Command Line Interface (CLI)

CLI Command Summary

Accedian MetroNID TE Specifications

General

Brand	Accedian
Model	MetroNID TE
Category	Modem
Language	English