Accell AxFAST 3202 - Installation

To Next Page

To Previous Page

8. INSTALLATION

Connecon of Accell AxFAST Portable EV Charger is easy.

Simply plug the NEMA 14-50 plug into a properly installed NEMA 14-50 outlet, when the blue

power light on the front panel is lit the unit is ready to charge.

If a permanent installaon is desired, Accell AxFAST Portable EV Charger can be mounted as

shown below, on either a hollow or solid wall. The screws and plasc wall anchors are

included in the accessory package.

Accell AxFAST 3202 User Manual, version 1.0, June 2019