8
www.accentworkspaces.co.nz
TRAPEZIUM WALLMOUNTED
ASSEMBLY INSTRUCTION
Measure and mark the table base height on the
wall.
Place the table frame near the wall.
Place the table top onto the wall bracket
and table base.
Attach the table top the wall bracket. Attach the table to the base.
STEP 4
STEP 6
STEP 8
STEP 5
STEP 7
STEP 9
Locate at least 2 studs on the wall. Pre–drill the
wall bracket and attach it to the wall.
**Use strong suitable wall fixing screws**
To Next Page
Loading...
