EasyManua.ls Logo

Accent DUO User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image


Parts list:






Question and Answer IconNeed help?

Do you have a question about the Accent DUO and is the answer not in the manual?

Accent DUO Specifications

General IconGeneral
BrandAccent
ModelDUO
CategoryIndoor Furnishing
LanguageEnglish

Summary

Assembly Guide

Tools Required

Lists the essential tools needed for the desk assembly process.

Parts List

Details all components and hardware included in the desk package.

Step 1: Attach Top Plates to Legs

Connects the top plates to the drive and non-drive legs using M8 x 12 bolts.

Step 2: Attach Top Frame to Legs

Secures the top frame to each leg using M6 x 8 bolts, potentially adjusting tension screws.

Step 3: Attach Leg Plates and Feet

Places leg plates onto legs and attaches feet using M6 x 25 bolts.

Step 4: Position Leg Frame on Desktop

Places the assembled leg frame onto the upside-down desktop and aligns the holes.

Step 5: Adjust and Attach Drive Rod

Adjusts the drive rod to the correct length and attaches it to each leg assembly.

Step 6: Secure Frame to Desktop and Legs

Fastens the frame to the desktop using M6 x 20 bolts and tightens leg plate bolts.

Step 7: Install Transformer and Switch

Mounts the transformer and switch, routing the switch wire to the transformer.

Step 8: Attach Cable Clips and Motor Cable

Attaches cable clips with M6 x 30 screws and connects the motor cable to the transformer.

Step 9: Rotate Desk Upright and Install Port

Lifts the desk into an upright position and installs the cable port.