Access Motor DRR 100 - User Manual

TABLE OF CONTENT
INTORDUCTION………………………………………………………..1
GENERAL INFORMATION…………………………………………..2-9
ATV Identification Numbers……………………………………………..3
Ignition Switch Key………………………………………………………3
Control Locations and Function………………………………………….4
Gas/Vent Hoses…………………………………………………………..6
Carburetor Float Bowl Drain……………………………………………..7
Seat Lock…………………………………………………………………7
Safety Flag/Bracket………………………………………………………7
Transporting ATV………………………………………………………...7
Gasoline-Oil-Lubricant…………………………………………………...8
Break-in-Procedure……………………………………………………….9
GENERAL MAINTENANCE………………………………………10-20
Maintenance Schedule…………………………………………………..10
Shock Absorbers………………………………………………………...11
Cables…………………………………………………………………...11
Transmission Lubricant…………………………………………………11
Hand Brake System……………………………………………………..12
Adjusting Brakes………………………………………………………..12
Protective Rubber Boots………………………………………………..13
Battery…………………………………………………………………..14
Spark Plug………………………………………………………………14
Radiator (Liquid Cool model)…………………………………………..15
Engine Idle RPM Adjustment…………………………………………..16
Throttle Cable Adjustment……………………………………………...16
Air Filter………………………………………………………………...17
Tires……………………………………………………………………..18
Wheel Removal…………………………………………………………19
Bulb Replacement………………………………………………………19
Fuse……………………………………………………………………..19
Storage Compartment/Tools…………………………………………….20
ACCESS MOTOR
DRR 50/100
USER MANUAL

Summary

General Information and Identification

ATV Identification Numbers (VIN;ESN)

Details on VIN and Engine Serial Number (ESN) location and importance for service.

Control Locations and Operation

Ignition Switch Functions

Explanation of the ignition switch's ON and OFF positions and key removal.

Hand Brakes and Lever Locks

How to apply the hand brakes and use the brake lever locks for parking.

Emergency Stop Switch Function

Description of the emergency stop switch's function and its interaction with the ignition.

Throttle Lever Operation

Explanation of how to control engine RPM using the thumb-operated throttle lever.

Fuel Valve Operation and Positions

Details on the fuel valve's ON, RES, and OFF positions and proper usage.

Safety Flag and ATV Transport

Bracket for flag visibility and recommended procedure for safely transporting the ATV.

Fuel, Oil, and Lubricant Specifications

Recommended Gasoline and Oil

Specifies recommended gasoline, octane, and 2-cycle injection oil for the ATV.

Transmission Lubricant Specification

Specifies the recommended SAE 80W-90 hypoid lubricant for the transmission.

Safe Gas Tank Filling Procedures

Safety precautions and instructions for filling the ATV's gas tank.

ATV Break-in Procedure

Guidance on the break-in period for new ATVs to ensure engine longevity and performance.

General Maintenance Schedule

Maintenance Schedule Overview

Overview of maintenance items, their frequency, and corresponding page numbers for instructions.

Component Maintenance and Checks

Shock Absorber Inspection Details

Transmission Lubricant Change Procedure

Procedure for changing the transmission lubricant, including draining and filling.

Brake System Adjustment and Checks

Brake Lever Lock Verification

Front Wheel Brake System Adjustment

Procedure for adjusting the front wheel brake system for proper engagement.

Rear Wheel Brake System Check

Procedure for checking the rear wheel brake system operation before riding.

Disc Brake Fluid Level and Inspection

Engine and Throttle Adjustment

Engine Idle RPM Adjustment

Throttle Cable Free-Play Adjustment

Air Filter Cleaning and Service

Tire Maintenance and Replacement

Tire Specifications and Inflation

Tire Tread Wear and Replacement

Information on identifying worn-out tires based on tread depth and when to replace them.

Tire Replacement Procedures and Precautions

Preparation for ATV Storage

Fuel System Stabilization

Battery Disconnection and Storage Safety

Preparation After ATV Storage

Brake, Tire, and Fastener System Checks

Access Motor DRR 100 Specifications

General

Brand	Access Motor
Model	DRR 100
Category	Offroad Vehicle
Language	English