Access Digital Box - User Manual

Step 1: Plug in and power up.
A. Connect the coax cable to the cable in/RF in port on your TV box and to the cable outlet.
Push the connector on to the port, then turn to engage the threads, and finally finger tighten the connector.
B. Plug one end of the HDMI cable to the HDMI/HD to TV port located on the back of your TV box. Plug the
other end into an HDMI port on your TV.
C. Plug the power cord into your TV box. Plug the other end into an electrical outlet.
What’s included:
Installation Guide
Digital Box
AccessTV box: coax, HDMI
and power cables go into here.
Universal remote
x2 AA batters included
Coax splitter
(Optional)
Coax cable HDMI cable Power cord

Summary

Whats Included

Step 1: Plug In and Power Up

Connect Coax Cable

Connect the coax cable to the TV box and cable outlet.

Connect HDMI Cable

Connect the HDMI cable to the TV box and TV.

Connect Power Cord

Plug the power cord into the TV box and an electrical outlet.

Step 2: Activate Your Service

Confirm Connections

Verify all connections are correctly made to the AccessTV box ports.

Set TV Input

Ensure TV input matches the HDMI port used for the box.

Power On and Load

Turn on TV and box; the digital box will begin loading.

Program Remote

Program remote for TV volume, on/off, and mute during box loading.

View Channels

Channels become available after the box loading process is complete.

Need More Assistance

Find Answers

Locate answers to common questions online and via support.

Access Digital Box Specifications

General

Brand	Access
Model	Digital Box
Category	Set-top boxes
Language	English