Access Liberty - Declaration of Conformity

4
Model:
Hull Identification No:
Design Category C: “Inshore”
Craft designed for voyages in coastal waters, large
bays, estuaries, lakes and rivers where conditions
up to and including, wind force 6 and significant
wave heights up to, and including, 2 metres may
be experienced.
Built by:
Access Dinghy Sailing Systems Pty Ltd
2/7 Bungaleen Court
Dandenong, Victoria 3175
Australia
Ph: 61 3 9768 3101 Fax: 61 3 9768 3103
Email: info@accessdinghy.org
Using the moulds, parts,
and measurements
authenticated by
Access Dinghy Sailing Systems Pty Ltd
Sail No:
Declaration of Conformity
Recreational Craft Directive 94/25/EC
Capacity:
Maximum number of people: 1.
Maximum weight of people 120 kg.
Maximum weight of additional load 30 kg.
LIBERTY
Chris Mitchell, Managing Director
Access Dinghy Sailing Systems Pty Ltd
Signed: .....................................................................
Date: ..................................................
REF ESSENTIAL REQUIREMENTS STANDARD USED
2 General Requirements
2.1
Hull Identification No (HIN) ISO10087.95E (attached to craft)
2.2
Builders Plate ISO14945:2004 (attached to craft)
2.4
Owner’s Manual ISO10240:1996 (attached)
3 Integrity and Structural Requirements
3.1
Structure ISO12215-1:2000 (as per Access Dinghy Sailing Sys-
tems Production Manual)
3.2
Stability and freeboard ISO12217-3:2002
3.3
Buoyancy and flotation ISO12217-3:2002
3.4
Manufacturers recommended load ISO14946:2001 (as shown on Builders Plate)
3.5
Towing ISO15084:2003
5 Steering Systems
5.4.1
General Steering System ISO8847:2004
(manual joystick or servo assist controls)