Access VIRUS - Page 155

ACCESS VIRUS OS4 153
Input
01111111111111111112
1 INPUT
Select In L+R≤
61111111111111111154
If the selected signal source is a
stereo source - i.e. IN L+R, AUX 1
L+R or AUX 2 L+R - then the sound
program is automatically switched
internally to UNISON-MODE =
Twin, regardless of the UNISON
MODE parameter setting so that
the input signal is processed in ste-
reo. In this case, the UNISON
parameters PAN SPREAD and LFO
PHASE (see appropriate section)
are active.
When you select an internal aux
path as a signal source, you of
course must route the signals of
another PART to this aux path via
OUTPUT SELECT before you can
establish a signal connection
between the two PARTS. Several
PARTs can simultaneously access
the external input or the internal
aux paths via INPUT SELECT.
AUX 1 L+R Both channels of internal Aux 1 (stereo).
AUX 1 R The right channel of internal Aux 1.
AUX 2 L The left channel of internal Aux 2.
AUX 2 L+R Both channels of internal Aux 2 (stereo).
AUX 2 R The right channel of internal Aux 2.