172 CHAPTER 16
Parameter of the effects menu
REVERB FEEDBACK
Available exclusively for the
Rev+Feedb1 and Rev+Feedb2 algo-
rithms, this parameter controls the
amount of pre-delay feedback.
Here the room signal is repeated at
intervals that are determined by
the pre-delay time. Note that the
signal level fades gradually.
REVERB COLOR also has an influ-
ence on feedback. The intensity of
the filtering effect generated by
the low-pass or high-pass filter
increases with every repetition.
Feedback is subtle when the decay
time of the room (REVERB DECAY
TIME) is long. The effect will
become more prominent when
you set a short decay time and a
long pre-delay time.
01111111111111111112
1 REVERB
Feedback 50≤
61111111111111111154
REVERB OUTPUT SELECT
Here you can select the external or
internal output for the REVERB sec-
tion.
01111111111111111112
1 REVERB
OutSel Out1+2≤
61111111111111111154
To Next Page
Loading...
