Access VIRUS - Page 180

178 CHAPTER 17
Global-, MIDI- and System Parameters
on, but to switch it off if you
should feel that this is necessary
(Off).
01111111111111111112
1 MIDI
ClockRx Auto≤
61111111111111111154
Midi Volume Enable
Globally switches the reception of
Volume data (Controller #7) on
(ENA) or off (DIS).
01111111111111111112
1 MIDI
MidiVolume Ena≤
61111111111111111154
Program Change Enable
Globally swithes the reception of
Program Change Data for SINGLE
programs on and off.
01111111111111111112
1 MIDI
ProgChange Ena≤
61111111111111111154
Multi Program Change Enable
This function controls if the VIRUS
receives program changes of
multi-setups. If enabled, the VIRUS
switches an entire multi-setup by a
program change. The global MIDI
channel has to be used to receive
the program change. Please note
that the multi program change will
not work in the single-multi mode,
because, in this mode, the display
is unable to show the change.
01111111111111111112
1 MIDI
MultiPrgChg Dis≤
61111111111111111154
Midi Device Id
Here you can enter the identifica-
tion number for system exclusive
data transfer. To enable communi-
cation between two Virus units -