Access VIRUS - Page 183

ACCESS VIRUS OS4 181
System
to the value as in JUMP Mode.
 RELATIVE (≤)When you adjust a
knob in RELATIVE Mode, the
parameter is affected immediately
but not absolutely. The value
change from the original value to
the new value reflects precisely the
amount you adjusted via a given
control.
01111111111111111112
1 SYSTEM
KnobMode Jump≤
61111111111111111154
KNOB DISPLAY
In an active menu, SYSTEM KNOB
DISPLAY offers different display
option for parameters that have
knobs assigned to them:
 OFF Knob movements are not
displayed; the current contents of
the display remain intact when
you turn a knob.
 SHORT When you turn a knob,
the current contents of the lower
display line are briefly overwritten
by data representing the change in
parameter value; once the action is
completed, the original contents
reappear in the lower display line.
 LONG Same as SHORT, except
that - you guessed it - the display
shows the knob data for a longer
period of time.
 ON The contents of the display
are overwritten when you turn a
knob; the original menu does not
reappear in the display.
01111111111111111112
1 SYSTEM
KnobDispl Short≤
61111111111111111154
LED MODE
Here you can chose between two
operating modes for the RATE LEDs
of LFO 1 and 2:
 LFO The LEDs indicate the oscil-
lations of the LFOs.
 INPUT The LEDs serve as level
indicators for the two external
audio inputs (RATE 1 = Input L; RATE
2 = Input R). The brightness of the
LEDs indicates the current input
level; signal saturation is indicated