46 CHAPTER 4
Introduction
You can also use S&H and S&G in
ENV MODE to come up with some
attractive results: S&H generates a
single random value at the start of
a note (in this case, the RATE pot
has no effect); S&G works in the
same manner although in this case
the RATE value is crucial. It deter-
mines the amount of time it takes
to glide from the previous to the
new random value.
LFO 2
The design of the second LFO is
essentially the same as the first, so
we’ll spare you the repetition of
details SHAPE 1 and 2 are available
as a joint modulation target; the
filter frequencies and the Pan-
orama position can be manipu-
lated individually. You may also
freely select a parameter for your
modulation destination.
To Next Page
Loading...
