AccessMaster 891AC User Manual

Single Button Remote Control
Model 891AC
3-Button Remote Control
Model 893AC
TO ERASE ALL CODES FROM MEMORY
REMOTE CONTROLS
MODELS 891AC & 893AC
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate,
or play with remote controls.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are
no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to
cross path of moving gate or door.
Press and hold the button
on the remote control
that you wish to use.
“click”
“click”
Release the button
when the garage
door opener lights
blink or two clicks
are heard.
If programming to
other products,
press the button a
second time to
activate the product.
Locate the
Learn button.
Press and
immediately release
the Learn button.
The Learn LED will glow
steadily for 30 seconds.
Within 30 seconds...
PROGRAM USING THE GARAGE DOOR OPENER
For use with AccessMaster
®
Garage Door Openers that have a yellow Learn button and yellow
antenna. The code between the remote control and the receiver changes with each use, randomly
accessing over a billion new codes. Refer to your product manual for the location of the learn
button.
NOTE: Your product may look different than the products illustrated in this manual.
When deactivating any unwanted remote
control code, all previous codes will be
erased.
Press and hold the Learn button on garage door opener
or other product until the learn LED goes out
(approximately 6 seconds). All previous codes are
now erased. Reprogram each remote control you
wish to use.
LED
LED
Press the LEARN button again,
the LED will flash once.
Press the LEARN button on
the door control to enter
Programming Mode.
The command LED
will flash once.
The command LED
will flash once again.
Press and hold the button
on the remote control
that you wish to use.
“click”
“click”
Release the button when
the garage door opener
lights blink or two clicks
are heard.
If programming to other
products, press the
button a second time to
activate the product.
PROGRAM USING THE DOOR CONTROL

AccessMaster 891AC Specifications

General

Type	Remote Control
Brand	AccessMaster
Model	891AC
Battery Type	CR2032
Color	Black

Summary

Program Garage Door Opener

Locate Learn Button

Identify the yellow Learn button on the garage door opener unit.

Initiate Programming Mode

Press and immediately release the Learn button; the Learn LED will glow steadily.

Program Remote Button

Press the remote button; release when opener lights blink or two clicks are heard.

Program Using Door Control

Activate Door Control Programming

Press the LEARN button on the door control to enter Programming Mode.

Confirm Door Control Mode

Press the LEARN button again; the command LED will flash once.

Program Remote via Door Control

Press the remote button; release when opener lights blink or two clicks are heard.

Erase All Remote Codes

Execute Code Erasure

Press and hold the Learn button until the learn LED goes out (approx. 6 seconds).

Control Garage Door Opener Lights

Select Remote Button for Light

Press and hold the remote control button you want to control the light.

Activate Light Function

Press and hold the LIGHT button on the door control.

Confirm Light Control

Press and hold the LOCK button; release all buttons when opener lights flash.

Remote Control Battery Replacement

Open Remote Case

Pry open the case using the visor clip, starting in the middle.

Remove Old Battery

Remove the old battery and dispose of it properly.

Insert New Battery

Insert a new 3V CR2032 coin cell battery with the positive side up.

Close Remote Case

Replace the cover securely after inserting the new battery.

Remote Control Usage and Support

General Remote Operation

Press and hold the button until the door or gate starts to move.

Multi-Button Remote Functions

Additional buttons can program up to 3 devices like openers or light controls.

Replacement Parts Information

Lists replacement parts like batteries and visor clips with contact info.

Product Warranty Details

Details the one-year limited warranty for the product.