Accessmatic Pitbull 400

Need help?

Do you have a question about the Accessmatic Pitbull 400 and is the answer not in the manual?

Summary

User Manual

Warning

Read manual carefully before installation. Installation by unqualified person can cause injury or death.

Safety Instruction

Packing List

List of included items: Main engine, release keys, remote control, washers, limit switch box, and accessories.

Technical Parameters

Installation

Installation Drawing

Diagram showing gate opener, keypad, sensors, alarm lamp, stop block, gear rack, and remote control.

Preparation Work Before Installation

Installation Site Preparation

Includes cable installation, concrete pedestal casting, and operator base mounting for proper setup.

Gear Rack Installation

Spring Switch Limit

Install limit switches at both ends for safety; preset position using release key and adjust blocks.

Operation Manual

Cable Connection

Ensure the equipment is turned off before making any electrical connections.

Control Board

Wiring for Control Board

Details input voltage (J3) and warning light connection (J4) for PITBULL400: AC110V.

Tuning and Operation

Adjust Potentiometer Knobs

Adjust VR1 (closing time), VR2 (brake), VR3 (soft start), VR4 (opening force) for optimal performance.

Remote Control Operation

Remote Control Management

Add up to 25 remotes; delete all remotes by holding REMOTES button until STS flashes.

Pedestrian Mode

Fourth button opens door for 1 meter for pedestrian access.

Programming Process

DIP Switch Settings

Configuration details for DIP switches 1-8 on the control board for various functions.

Important Notes

Operational Features

Details remote control modes, automatic closing, safety devices, opening priority, and thermal protection.

Maintenance

Service and Checks

Includes monthly checks, bulb replacement safety, manual reading, and company rights.

Troubleshooting

Common Gate Operation Issues

Addresses problems like gate not moving, LED off, unable to close, motor noise, or reversing.

Remote and Electrical Problems

Covers remote control issues, short range, limit position errors, leakage trips, and automatic opening.

Warranty Requirements

Claim and Validity

Process for claims, unauthorized tampering, and requirements for installation and maintenance.

Warranty Times

Component Coverage

Details warranty periods for motors, electrical parts, remote controls, and batteries.

Spare Parts Warranty

Conditions for Guarantee

Requires invoice/service order; warranty subject to technical review by service center.

Special Service and 5 D Warranty

Requires preventive maintenance and review; 5D warranty for replacement of defective products.

Special Considerations

Maintenance and Registration

Covers travel expenses, authorized service, and mandatory product registration on fixer.com.co.

Warranty Denial Reasons

Exclusion Criteria

Reasons for denial: electrical damage, poor installation, misuse, accidents, interference, lack of maintenance.