Acclaim Lighting AL Driver series - User Manual

User guide
www.acclaimlighting.com
AL Driver series
F use
2 50V/8A
V +
V +
Red -
Green -
Blue -
White -
1
F use
2 50V/8A
V +
V +
Red -
Green -
Blue -
White -
2
F use
2 50V/8A
V +
V +
Red -
Green -
Blue -
White -
3
F use
2 50V/8A
V +
V +
Red -
Green -
Blue -
White -
4
1=Ground 2= DATA- 3 = D ATA +
DMX/RDM OUT
321
ANALOG IN
0-10V/1-10V
GND
DALI IN
DA DA
DM X /RDM I N
321
F use
2 50V/8A
V +
V +
Red -
Green -
Blue -
White -
1
F use
2 50V/8A
V +
V +
Red -
Green -
Blue -
White -
2
F use
2 50V/8A
V +
V +
Red -
Green -
Blue -
White -
3
F use
2 50V/8A
V +
V +
Red -
Green -
Blue -
White -
4
1=Ground 2= DATA- 3 = D ATA +
DMX/RDM OUT
321
ANALOG IN
0-10V/1-10V
GND
DALI IN
DA DA
DM X /RDM I N
321
ON
2 3 4 5 6 7 8 9
10
11
12
1
GND
GND
GND
GND
+12-24V
+12-24V
DMX INDMX OUTD C IN
Data-
Data-
Data+
Data+
8A
DMX Address Setting
1 2 3
DMX mode
Dimming mode
Built in mode
4 5 6 7 8 9 10 11 12
OUTPUT
White
Blue
Green
Red
+12V/8A
+24V/4A
Made in P.R.C.
ON
2 3 4 5 6 7 8 9
10
11
12
1
GND
GND
GND
GND
+12-24V
+12-24V
DMX INDMX OUTD C IN
Data-
Data-
Data+
Data+
8A
DMX Address Setting
1 2 3
DMX mode
Dimming mode
Built in mode
4 5 6 7 8 9 10 11 12
OUTPUT
White
Blue
Green
Red
+12V/8A
+24V/4A
Made in P.R.C.

Summary

Introduction to Acclaim Lighting AL Drivers

Welcome to the AL Driver Series

Welcomes the user to the AL Driver series and its capabilities.

Safety Precautions for AL Drivers

Provides essential safety guidelines for using Acclaim Lighting AL Drivers.

Installation Guide for AL Drivers

Mounting and Input Connections

Details mounting, DMX, DALI, and analog signal connections for AL Drivers.

Output Ports and Power Wiring

Covers output port connections, fuses, and input power wiring for AL Drivers.

AL Driver 1 and 4 Installation Details

Specific installation details for the AL Driver 1 and AL Driver 4 models.

AL Driver 1 Operation and Setup

AL Driver 1 Connections and Power

Details DMX/analog inputs, power requirements, and LED outputs for AL Driver 1.

AL Driver 1 Configuration Options

External Control Setup

Explains configuring AL Driver 1 for DMX or analog external control.

Standalone Dimming Setup

Details setting up the AL Driver 1 for standalone dimming operation.

AL Driver 4 Operation and Setup

AL Driver 4 Connections and Power

Details DMX input, LED output connections, and power requirements for AL Driver 4.

AL Driver 4 Configuration Options

AL Driver 4 DMX Control Setup

Explains configuring AL Driver 4 for DMX control using switch settings.

AL Driver 4 Standalone Modes

Describes standalone color mixing and chase patterns on the AL Driver 4.

Operation of AL Drivers 200;400;800

Menu Navigation Basics

Explains how to navigate the AL Driver's menu using control buttons.

AL Driver Menu Items (DMX512 Mode)

Mode, Load, and Channel Settings

Sets DMX mode, load type, and port distribution for DMX control.

DMX Addressing and Glide Function

Configures DMX start address, last hold, and glide for smooth dimming.

Temperature Monitoring

Displays and resets max/min internal temperature readings.

AL Driver Menu Items (DALI Mode)

Mode, Load, and Address Settings

Sets DALI mode, load type, and DALI start address for the unit.

Temperature Monitoring

Displays and resets max/min internal temperature readings.

AL Driver Menu Items (0-10 V;1-10 V Mode)

Mode, Load, and Input Settings

Sets 0-10V/1-10V mode, load type, and input signal status.

Temperature Monitoring

Displays and resets max/min internal temperature readings.

AL Driver Menu Items (Manual Mode)

Mode, Load, and Color Intensity

Sets manual mode, load type, and color intensity for R, G, B, W channels.

Temperature Monitoring

Displays and resets max/min internal temperature readings.

AL Driver Menu Items (Auto Mode)

Mode, Load, and Chase Settings

Sets auto mode, load type, and chase pattern parameters.

Chase Speed and Fade Time

Controls chase speed and crossfade time between steps.

Temperature Monitoring

Displays and resets max/min internal temperature readings.

Choosing a Control Mode

AL Driver 200 Channel and Load Settings

AL Driver 400 Channel and Load Settings

AL Driver 800 Channel and Load Settings

Choosing a Base Address (DMX and DALI)

Choosing Load Type (Manual and Auto Modes)

Setting a Static Color Mix (Manual Mode)

Choosing a Chase Pattern (Auto Mode)

Configuration via RDM

Configuring DMX Address via RDM

How to configure DMX addresses remotely using RDM with the XMT-350.

Setting Control Mode via RDM

Setting Control Mode using XMT-350

Steps to set the AL Driver's control mode remotely via RDM.

AL Driver 200 Address Layout (RGBW)

AL Driver 200 Address Layout (RGB)

AL Driver 200 Address Layout (Ai Dim, White & DW)

AL Driver 400 Address Layout (RGBW)

AL Driver 400 Address Layout (RGB)

AL Driver 400 Address Layout (Ai Dim, White & DW)

AL Driver 800 Address Layout (RGBW)

AL Driver 800 Address Layout (RGB)

AL Driver 800 Address Layout (Ai Dim, White & DW)

Further Information and Specifications

AL Driver 1 and 4 Specifications

Lists technical specifications for AL Driver 1 and AL Driver 4 models.

AL Driver 200, 400 and 800 Specifications

Details technical specifications for AL Driver 200, 400, and 800 models.

AL Driver 1 Dimensions

AL Driver 4 Dimensions

AL Driver 200 Dimensions

AL Driver 400 Dimensions

AL Driver 800 Dimensions

Limited Product Warranty

Acclaim Lighting AL Driver series Specifications

General

Brand	Acclaim Lighting
Model	AL Driver series
Category	Control Unit
Language	English